Torwell PLA Carbon Fiber 3D Printer Filament, 1.75mm 0.8kg/spool, Matte Black
Likarolo tsa Sehlahisoa
Li-filament tsa carbon fiber ke lintho tse entsoeng ka motsoako o entsoeng ka ho kenya likhechana tsa carbon fiber sebakeng sa polymer, tse tšoanang le likhoele tse kentsoeng ka tšepe empa li na le likhoele tse nyane.Motheo oa polymer e ka ba oa lisebelisoa tse fapaneng tsa khatiso tsa 3D, tse kang PLA, ABS, PETG kapa nylon, har'a tse ling.
Matla a eketsehileng le ho satalla, botsitso bo botle ba sebopeho, Qetello e ntle ka kakaretso.Boima bo bobebe bo etsang hore filament ena ea 3d e be khetho e ntle bakeng sa lihahi tsa drone le RC hobbyists.
| Branta | Tkapa hantle |
| Lintho tse bonahalang | 20% High-Modulus Carbon Fibers e kopantsoeng le80%PLA (NatureWorks 4032D) |
| Diameter | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 800g / spool;250g / spool;500g / spool;1kg / spool; |
| Boima bo felletseng | 1.0Kg/spool |
| Mamello | ± 0.03 limilimithara |
| Length | 1.75mm(800g) =260m |
| Tikoloho ea Polokelo | E omme ebile e kenya moea |
| Ho omisa Setting | 55˚C bakeng sa 6h |
| Lisebelisoa tsa tšehetso | Etsa kopo leTorwell HIPS, Torwell PVA |
| Tumello ea Setifikeiti | CE, MSDS, Reach, FDA, TUV le SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le likhatiso tse ling tsa FDM 3D |
| Sephutheloana | 1kg / spool;8spools/ctn kapa 10spools/ctnmokotla oa polasetiki o tiisitsoeng o nang le li-desiccants |
Mebala e Meng
Sephutheloana
Setsi sa Fektheri
Torwell, moetsi ea hloahloa ea nang le boiphihlelo bo fetang lilemo tse 10 mabapi le likhoele tsa khatiso tsa 3D.
Ke hobane'ng ha PLA Carbon Fiber filament?
Torwell PLA-CF ke carbon PLA 1.75mm e nang le matla a holimo le ho tiea ho holimo ha e ntse e bontša ho tiea ho hotle.PLA carbon fiber 3D printer filament e boetse e na le satin e tsotehang le qetello ea matte e etsang hore khatiso e shebahale e le boreleli haholo.
Carbon Fiber (e nang le 20% carbon fiber, boima ba eona) e kopantsoe le PLA ho etsa polasetiki e matla e loketseng bakeng sa ho hatisa lintho tse hlokang matla a eketsehileng, ho senya ho feta PLA e tloaelehileng.
Keletso ea Bohlokoa
A. Carbon Fiber e brittle ho feta PLA e tloaelehileng ka mokhoa oa eona oa filament, kahoo pls u se ke ua khumama le ho e sebetsana ka hloko ho thibela ho senyeha.
B. Re khothaletsa ho sebelisa nozzle ea 0.5mm kapa e kholoanyane ho qoba ho koala ho feteletseng.
C. Ka kopo, kenya mokelikeli o thibelang maqeba ho printa ea hau pele o hatisa ka Torwell PLA-CF joalo ka nozzle ea tšepe e sa hloekang.Kaha carbon fiber PLA filament e na le kutloelo-bohloko ho mongobo, ka kopo etsa bonnete ba hore u se ke ua e sebelisa sebakeng sa mongobo o phahameng 'me u e khutlisetse ho bobe bo ka etsoang hape ka mor'a tšebeliso.
LBH
A: Torwell carbon faeba hangata e entsoe ka faeba ea khabone e khaotsoeng.
A: 1-3 limilimithara
A: Torwell carbon fibers ke modulus e mahareng.
A: Torwell pla filament e na le hoo e ka bang 20% ea khabone ea fiber.
| Botenya | 1.32 g/cm3 |
| Melt Flow Index(g/10min) | 5.5（190℃/2.16kg） |
| Mocheso oa ho Sotha Mocheso | 58℃, 0.45MPa |
| Matla a tšepe | 70 MPa |
| Elongation at Break | 32% |
| Flexural Matla | 45MPa |
| Flexural Modulus | 2250MPa |
| IZOD Impact Matla | 30kJ/㎡ |
| Ho tšoarella | 6/10 |
| Khatiso | 9/10 |
| Extruder Temperature(℃) | 190-230℃E khothalelitsoe 215℃ |
| Mocheso oa bethe (℃) | 25 - 60°C |
| Nozzle Boholo | ≥0.5 limilimitharaHo molemo ho sebelisa Nozzles ea tšepe e thata. |
| Lebelo la Fane | Ka 100% |
| Lebelo la ho Hatisa | 40 -80mm/s |
| Bethe e futhumetseng | Taba ea boikhethelo |
| E khothalelitsoeng ho Haha Libaka | Khalase e nang le sekhomaretsi, pampiri ea Masking, Blue Tape, BuilTak, PEI |
