Dual Color Silk PLA 3D Filament, Pearlescent 1.75mm, Coextrusion Rainbow
Likarolo tsa Sehlahisoa
Torwell Dual Color Coextrusion Filament
Ho fapana le mokhoa o tloaelehileng oa phetoho ea mebala ea PLA filament, inch e 'ngoe le e' ngoe ea boselamose bona ba 3d e entsoe ka mebala e 'meli.Ka hona, u tla fumana mebala eohle habonolo, esita le bakeng sa likhatiso tse nyane haholo.
Lintlha tse Khabane tse Boreleli le tse Benyang
Lebaka leo ka lona khoele ena ea khatiso ea 3D e shebahalang e le ntle ke sebaka se hlollang sa silika sa PLA.
| Branta | Tkapa hantle |
| Lintho tse bonahalang | metsoako ea polymer Pearlescent PLA (NatureWorks 4032D |
| Diameter | 1.75 limilimithara |
| Boima bo kahare | 1Kg / spool;250g / spool;500g / spool; |
| Boima bo felletseng | 1.2Kg/spool |
| Mamello | ± 0.03 limilimithara |
| Length | 1.75mm(1kg) = 325m |
| Tikoloho ea Polokelo | E omme ebile e kenya moea |
| Ho omisa Setting | 55˚C bakeng sa 6h |
| Lisebelisoa tsa tšehetso | Etsa kopo leTorwell HIPS, Torwell PVA |
| Tumello ea Setifikeiti | CE, MSDS, Reach, FDA, TUV le SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le likhatiso tse ling tsa FDM 3D |
| Sephutheloana | 1kg / spool;8spools/ctn kapa 10spools/ctnmokotla oa polasetiki o tiisitsoeng o nang le li-desiccants |
Mebala e Meng
Mmala o teng:
| Mobala oa motheo | Bosweu, Botsho, Bofubedu, Boputswa, Bosehla, Botala, Silevera, Boputswa, Khauta, Namunu, Bopinki |
| Amohela Customer PMS Color | |
Pontšo ea Mohlala
Sephutheloana
Setsi sa Fektheri
Torwell, moetsi ea hloahloa ea nang le boiphihlelo bo fetang lilemo tse 10 mabapi le likhoele tsa khatiso tsa 3D.
HLOKOMELA
• Boloka khoele e otlolohile ka hohle kamoo ho ka khonehang ntle le ho e sotha.
• Ka lebaka la khanya ea ho thunya kapa pontšo ea qeto, ho na le moriti o monyenyane oa mebala pakeng tsa litšoantšo le likhoele.
• Ho na le phapang e nyenyane pakeng tsa lihlopha tse fapaneng, kahoo ho kgothaletswa ho reka filament e lekaneng ka nako e le 'ngoe.
LBH
A: Netefatsa hore sethala se lekantsoe, sebaka se pakeng tsa molomo le bokaholimo ba sethala se loketse, e le hore terata e tsoang ka molomong e hatelle hanyane.
B: Sheba mocheso oa khatiso le boemo ba mocheso oa bethe e chesang.Mocheso o khothaletsoang oa khatiso ke 190-220°C, ’me mocheso oa bethe o chesang ke 40°C.
C: Bokaholimo ba sethala bo hloka ho hloekisoa kapa u ka sebelisa bokaholimo bo khethehileng, sekhomaretsi, moriri oa moriri jj.
D: Ho khomarela sekhahla sa pele ho futsanehile, ho ka ntlafatsoang ka ho eketsa bophara ba line ea extrusion ea lera la pele le ho fokotsa lebelo la khatiso.
A: Ho thatafala ha silika pla ho tlase ho feta PLA, ka lebaka la foromo e fapaneng.
B: O ka eketsa mocheso le palo ea marako a ka ntle ho ba le sekhomaretsi se setle sa lera.
C. boloka khoele e omme ho qoba ho robeha.
A: Mocheso o phahameng haholo o ka eketsa metsi a filament ka mor'a ho qhibiliha, re fana ka maikutlo a ho fokotsa mocheso ho fokotsa likhoele.
B: U ka fumana sebaka se setle ka ho fetisisa sa ho hula le lebelo la ho hula ka ho hatisa tlhahlobo ea likhoele.
A: Etsa bonnete ba hore o kenya ntlha e sa lefelloeng ea silika pla filament ka mekoting ho qoba ho ferekana nakong e tlang.
A: Ka kopo etsa bonnete ba hore filament e bolokiloe ka mokotleng o tiisitsoeng kapa lebokose ka mor'a khatiso e 'ngoe le e' ngoe ho thibela mongobo.
B: Haeba filament e se e ntse e kolobile mongobo, e omise ka ontong lihora tse 4 - 6 ho 40-45 ° C.
| Botenya | 1.25g/cm3 |
| Melt Flow Index(g/10min) | 11.3（190℃/2.16kg） |
| Mocheso oa ho Sotha Mocheso | 55℃, 0.45MPa |
| Matla a tšepe | 57MPa |
| Elongation at Break | 21.5% |
| Flexural Matla | 78MPa |
| Flexural Modulus | 2700 MPa |
| IZOD Impact Matla | 6.3kJ/㎡ |
| Ho tšoarella | 4/10 |
| Khatiso | 9/10 |
| Extruder Temperature(℃) | 190-220℃E khothalelitsoe≤200℃fumana khanya e betere |
| Mocheso oa bethe (℃) | 0 - 60°C |
| Nozzle Boholo | ≥0.4 limilimithara |
| Lebelo la Fane | Ka 100% |
| Lebelo la ho Hatisa | 30 -60mm/s;25-45mm/s bakeng sa ntho e rarahaneng, 45-60mm/s bakeng sa ntho e bonolo |
| Layer Height | 0.2 limilimithara |
| Bethe e futhumetseng | Taba ea boikhethelo |
| E khothalelitsoeng ho Haha Libaka | Khalase e nang le sekhomaretsi, pampiri ea Masking, Blue Tape, BuilTak, PEI |
