PLA Silky Rainbow filament 3D printer Filament
Tlhaloso
• Sebaka se setle, se benyang se holimo.
• Bokaholimo bo benyang le boreleli bo kang silika.
• 100% bio-degradable le polokeho ea lijo ea FDA e lumelletsoe.
• Sekhahla sa ho fokotseha ha thepa e tlaase, bophara bo lekanang.
• E phuthetsoe ka makhethe, qhibiliha hantle, fepa ka mokhoa o ts'oanang le kamehla ntle le ho koala molomo kapa extruder.
Likarolo tsa Sehlahisoa
| Brand | Torwell |
| Lintho tse bonahalang | metsoako ea polymer Pearlescent PLA (NatureWorks 4032D) |
| Diameter | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 1 Kg / spool;250g / spool;500g / spool;3kg / spool;5kg / spool;10kg / spool |
| Boima bo felletseng | 1.2Kg/spool |
| Mamello | ± 0.03 limilimithara |
| Bolelele | 1.75mm(1kg) = 325m |
| Tikoloho ea Polokelo | E omme ebile e kenya moea |
| Ho omisa Setting | 55˚C bakeng sa 6h |
| Lisebelisoa tsa tšehetso | Etsa kopo ka Torwell HIPS, Torwell PVA |
| Tumello ea Setifikeiti | CE, MSDS, Reach, FDA, TUV le SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le likhatiso tse ling tsa FDM 3D |
| Sephutheloana | 1kg / spool;8spools/ctn kapa 10spools/ctnmokotla oa polasetiki o tiisitsoeng o nang le li-desiccants |
Pontšo ea Mohlala
Setsi sa Fektheri
Malebela a ho Hatisa
1).Etsa bonnete ba hore o lokisa qetello ea khoele ka mor'a tšebeliso ea nako e 'ngoe le e' ngoe, joalo ka ho kenya ntlha e sa lefelloeng ea khoele ka mokoting ho qoba hore khoele e ferekane bakeng sa tšebeliso ea nako e tlang.
2).Bakeng sa ho lelefatsa bophelo ba khoele ea hau, ka kopo e boloke ka mokotleng o ommeng, o tiisitsoeng kapa lebokoseng
| Botenya | 1.21 g/cm3 |
| Melt Flow Index(g/10min) | 4.7 (190 ℃/2.16kg) |
| Mocheso oa ho Sotha Mocheso | 52 ℃, 0.45MPa |
| Matla a tšepe | 72 MPa |
| Elongation at Break | 14.5% |
| Flexural Matla | 65 MPa |
| Flexural Modulus | 1520 MPa |
| IZOD Impact Matla | 5.8kJ/㎡ |
| Ho tšoarella | 4/10 |
| Khatiso | 9/10 |
| Extruder Temperature(℃) | 190 - 230 ℃E khothalelitsoe 215 ℃ |
| Thempereichara ea bethe(℃) | 45 - 65°C |
| Boholo ba Nozzle | ≥0.4mm |
| Lebelo la Fane | Ka 100% |
| Lebelo la ho Hatisa | 40 - 100mm / s |
| Bethe e futhumetseng | Taba ea boikhethelo |
| E khothalelitsoeng ho Haha Libaka | Khalase e nang le sekhomaretsi, pampiri ea Masking, Blue Tape, BuilTak, PEI |
Ngola molaetsa wa hao mona mme o re romele wona
