PLA Silika 3D filament e putsoa 1.75mm
Likarolo tsa Sehlahisoa
TkapawellLi-filament tsa khatiso ea SILK 3D PLA li entsoe ka ho khetheha bakeng sa khatiso ea rona ea letsatsi le letsatsi. Ka likarolo tsa sebopeho se benyang sa silika le ho bonolo haholo ho li hatisa, neng kapa neng ha re hatisa mekhabiso ea lapeng, lintho tsa ho bapala le lipapali, malapa, feshene, li-prototype, Torwell SILK 3D PLA filament ke khetho ea hau e ntle kamehla.
| Letšoao | Torwell |
| Thepa | metsoako ea polymer ea Pearlescent PLA (NatureWorks 4032D) |
| Bophara | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Boima bo felletseng | 1.2Kg/spool |
| Mamello | ± 0.03mm |
| Bolelele | 1.75mm(1kg) = 325m |
| Tikoloho ea Polokelo | E omme ebile e na le moea o kenang |
| Sebaka sa ho Omisa | 55˚C bakeng sa lihora tse 6 |
| Lisebelisoa tsa tšehetso | Sebelisa ka Torwell HIPS, Torwell PVA |
| Kamohelo ea Setifikeiti | CE, MSDS, Reach, FDA, TUV le SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le liprinta life kapa life tse ling tsa FDM 3D |
| Sephutheloana | 1kg/spool; 8spools/ctn kapa 10spools/ctn mokotlana oa polasetiki o koetsoeng o nang le lintho tse nosetsang |
[Ntlafatsa Filament ea Silika PLA]
Ka lebaka la thepa ea morao-rao e nang le patente, Silk PLA Blue filament e boreleli ebile e benya ho feta leha e le neng pele. Seo u se hatisang ka 3D se tla benya joalo ka litšoantšong, ha ho feteletso. Re ikhethile ka silika PLA filament 'me re tlisa boiphihlelo bo botle ka ho fetisisa ba ho qapa khatiso ea 3D.
[Ha e na Tangle 'me e bonolo ho e hatisa]
Mohala o Motle oa Tlhahiso o Laoloang, Ho Fokotsa Warpage le ho Shrinkage, Ho Etsa bonnete ba hore e Hatisoa ka No-Bubble le No-Jam, e phuthetsoe hantle ebile ha e na likhohlano, e bonolo ho e Hatisa le ho e Borelelitsa ka Ts'ebetso e Tsitsitseng ea ho Hatisa.
[Ho nepahala ha litekanyo le ho se fetohe]
Sistimi e tsoetseng pele ea ho lekanya bophara ba CCD le taolo e ikamahanyang le maemo tlhahisong e netefatsa likhoele tsena tsa PLA tsa bophara ba 1.75 mm, Ho nepahala +/- 0.03 mm e tla u fa khatiso e boreleli ea 3D.
[E theko e tlaase ebile e lumellana ka bophara]
Ka boiphihlelo ba lilemo tse fetang 11 ba ho etsa lipatlisiso le nts'etsopele ea li-filament tsa 3D, Torwell e khona ho hlahisa mefuta eohle ea li-filament ka bongata bo boholo ka boleng bo holimo, bo tlatsetsang ho theko e tlase le ho tšepahala ha li-filament tsa Torwell bakeng sa li-printer tse tloaelehileng tsa 3D, tse kang MK3, Ender 3, Monoprice FlashForge le tse ling.
Mebala e Mengata
'Mala o Fumaneha
| 'Mala oa motheo | Bosweu, Botsho, Bofubedu, Boputsoa, Bosehla, Botala, Silevera, Bohlooho, Khauta, Lamunu, Pinki |
| Amohela 'Mala oa PMS oa Moreki | |
Pontšo ea Mehlala
Sephutheloana
Filamente e 'ngoe le e 'ngoe ea Spool e Pakiloe ka Mokotleng o Koaletsoeng oa Vacuum, ho e Boloka e Omme le ho Boloka Ts'ebetso ea Eona e Phahameng Nako e Telele
Moqolo oa 1kg oa PLA Silk 3D filament e nang le desiccant ka har'a sephutheloana sa vacuum
Sekotlolo se seng le se seng ka lebokoseng le le leng (Lebokose la Torwell, Lebokose le sa nke lehlakore, kapa Lebokose le ikhethileng lea fumaneha)
Mabokose a 8 ka lebokose (boholo ba lebokose 44x44x19cm)
Setsi sa Feme
LBH
K: Etsa bonnete ba hore mocheso oa khatiso o tsamaisana hantle le lebelo la khatiso. U hloka ho fetola mocheso oa khatiso ho 200-220℃.
A: Silika PLA e na le sebopeho sa silika, bokaholimo bo boreleli le ho tiea ho matla, e leng se sa lokelang ho hatisoa ka mehlala e nepahetseng haholo kapa e menyenyane.
K: Bophara ba filament bo sa fetoheng, mocheso o tlase wa nozzle le ho nkeloa sebaka khafetsa ka mefuta e fapaneng ya difilament ho tla lebisa bothateng bona. Kahoo, pele o qala, hlwekisa nozzle mme o phahamise mocheso ho fihlela boleng bo nepahetseng.
K: re tla sebetsa ka vacuum cleaner ho beha lintho tse sebelisoang hore li be mongobo, ebe re li kenya ka lebokoseng la lebokose ho sireletsa tšenyo nakong ea lipalangoang.
Fana ka sampole ea mahala bakeng sa liteko. Re romelle imeile feelainfo@torwell3d.comKapa Skype alyssia.zheng.
Re tla u fa maikutlo nakong ea lihora tse 24.
| Botenya | 1.21 g/cm3 |
| Tekanyo ea Phallo ea Qhibilihang (g/10min) | 4.7（190℃/2.16kg） |
| Mocheso oa ho sotha mocheso | 52℃, 0.45MPa |
| Matla a tšepe | 72 MPa |
| Ho Lelefatsa Nako ea Phomolo | 14.5% |
| Matla a ho Tenyetseha | 65 MPa |
| Modulus ea ho Flexural | 1520 MPa |
| Matla a Tšusumetso ea IZOD | 5.8kJ/㎡ |
| Ho tšoarella | 4/10 |
| Ho ka hatisoa habonolo | 9/10 |
| Mocheso oa Extruder (℃) | 190 – 230℃ E khothaletsoa 215℃ |
| Mocheso oa bethe (℃) | 45 – 65°C |
| Boholo ba Nozzle | ≥0.4mm |
| Lebelo la Fene | Ka 100% |
| Lebelo la ho Hatisa | 40 – 100mm/s |
| Bethe e futhumetseng | Boikhethelo |
| Libaka tse Khothaletsoang tsa Kaho | Khalase e nang le sekhomaretsi, Pampiri ea ho phuthela, Theipi e Putsoa, BuilTak, PEI |
Ke hobane'ng ha likhoele li sa khone ho khomarela setofong habonolo?
1). Hlahloba boemo ba mocheso pele o printa, mocheso oa filament oa SILK PLA o ka bang 190-230℃;
2). Hlahloba hore na bokaholimo ba poleiti bo se bo sebelisitsoe nako e telele, ho kgothaletswa ho sebedisa sekhomaretsi sa PVA;
3). Haeba lera la pele le na le ho khomarela ho fokolang, ho kgothaletswa ho lokisa substrate e hatisitsoeng hape ho fokotsa sebaka se pakeng tsa nozzle le poleiti ya bokaholimo;
