ABS Filament bakeng sa lisebelisoa tsa khatiso tsa 3D prinitng 3D
Likarolo tsa Sehlahisoa
Acrylonitrile butadiene styrene (ABS) ke e 'ngoe ea li-printer tsa 3D tse tsebahalang haholo 'marakeng.
ABS e thata haholo ho e sebetsa ho feta PLA e tloaelehileng, athe e phahametse thepa ea thepa ho feta PLA.Lihlahisoa tsa ABS li khetholloa ka ho tšoarella ho phahameng le ho hanyetsa mocheso o phahameng.E hloka mocheso o phahameng oa ho sebetsa le bethe e futhumetseng.Thepa e atisa ho sotha ntle le mocheso o lekaneng.
ABS e fana ka liphetho tsa boleng bo holimo ha li sebetsoa hantle, tseo ka botsona e leng phephetso ho ba bangata.E boetse e loketse ho sebelisoa lits'ebetsong tse batlang li le holimo haholo, mohlala ho theha likarolo tsa khatiso tsa 3D.
| Brand | Torwell |
| Lintho tse bonahalang | QiMei PA747 |
| Diameter | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 1 Kg / spool;250g / spool;500g / spool;3kg / spool;5kg / spool;10kg / spool |
| Boima bo felletseng | 1.2Kg/spool |
| Mamello | ± 0.03 limilimithara |
| Bolelele | 1.75mm(1kg) = 410m |
| Tikoloho ea Polokelo | E omme ebile e kenya moea |
| Ho omisa Setting | 70˚C bakeng sa 6h |
| Lisebelisoa tsa tšehetso | Etsa kopo ka Torwell HIPS, Torwell PVA |
| Tumello ea Setifikeiti | CE, MSDS, Reach, FDA, TUV, SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le likhatiso tse ling tsa FDM 3D |
Mebala e Meng
Mmala oa Fumaneha
| Mobala oa motheo | Bosoeu, Botsho, Bokhubelu, Botala, Bosehla, Botala, Tlhaho, |
| Mmala o mong | Silver, Grey, Letlalo, Khauta, Pinki, Pherese, Orange, Yellow-gauta, Wood, Botala ba Keresemese, Galaxy blue, Sky blue, Transparent |
| Letoto la fluorescent | Bokhubelu ba Fluorescent, Bosehla ba Fluorescent, Botala ba Fluorescent, Boputsoa ba Fluorescent |
| Letoto le khanyang | Botala bo Khanyang, Boputsoa bo Khanyang |
| Letoto la ho fetola mebala | Botala bo boputsoa ho isa ho botala bo bosehla, Boputsoa ho isa bosoeu, Pherese ho isa ho Pinki, Boputsoa ho isa Bosoeu |
| Amohela Customer PMS Color | |
Pontšo ea Mohlala
Sephutheloana
1kg roll ABS filament e nang le desiccant ka har'a sephutheloana sa vaccum
Spool e 'ngoe le e' ngoe ka lebokoseng le le leng (lebokose la Torwell, Lebokose le sa nke lehlakore, kapa lebokose le ikhethileng le fumaneha)
Mabokose a 8 ka lebokose (boholo ba lebokose 44x44x19cm)
Setsi sa Fektheri
Litlhahiso tsa ho hatisa ABS filament
1. Letlapa le sebelisitsoeng.
ABS e na le kutloelo-bohloko ho phapano ea mocheso ho feta lisebelisoa tse ling, ho sebelisa sekoahelo ho tla boloka mocheso o sa fetohe, hape e ka boloka lerōle kapa litšila hole le khatiso.
2. Tlosa fene
Kaha haeba lesela le pholile ka potlako haholo, ho tla ba bonolo ho sotha.
3. Mocheso o phahameng le lebelo le liehang
Lebelo la khatiso le ka tlase ho 20 mm / s bakeng sa lihlopha tse seng kae tsa pele li tla etsa hore filament e khomarele bethe ea khatiso hantle haholo.Thempereichara e phahameng le lebelo le liehang li lebisa tlhokomelong e ntle ea lera.Lebelo le ka eketsoa ka mor'a hore lihlopha li hahe.
4. E boloke e omme
ABS ke thepa ea hygroscopic, e ka monyang mongobo moeeng.Ho sebelisa mekotla ea polasetiki ea vacuum ha u sa e sebelise.Kapa sebelisa omileng mabokose ho boloka.
Melemo ea ABS Filament
- Lintho tse ntle tsa mochini: Thepa e tsejoa e le matla, e thata, ebile e tšoarella.E fana ka khanyetso e ntle ea mocheso, motlakase le lik'hemik'hale tsa letsatsi le letsatsi.ABS e tenyetseha hanyane mme ka hona ha e brittle ho feta PLA.E leke ka bouena: Tsamaisa khoele ea ABS 'me e tla khopama le ho kobeha pele e robeha, ha PLA e tla robeha habonolo haholoanyane.
- Ho bonolo ho e etsa kamora ts'ebetso: ABS e bonolo haholo ho e kenya le ho etsa lehlabathe ho feta PLA.E ka boela ea sebetsoa ka mor'a mouoane oa acetone, o tlosang mela eohle ea lera ka botlalo mme o fana ka pheletso e hloekileng e boreleli.
- Theko e tlaase:Ke e 'ngoe ea li-filaments tse theko e tlaase.ABS e fana ka bohlokoa bo boholo ho nahanoa ka thepa ea eona e phahameng ea mochini, empa hlokomela boleng ba likhoele.
LBH
A: thepa e entsoe ka thepa e ikemetseng ka ho feletseng, 'me mochine o otlolla terata ka boeona.ka kakaretso, ho ke ke ha e-ba le mathata a mangata.
A: thepa ea rona e tla behoa pele ho tlhahiso ho thibela ho thehoa ha li-bubble.
A: bophara ba terata ke 1.75mm le 3mm, ho na le mebala e 15, hape e ka etsa mmala oo u o batlang haeba ho na le taelo e kholo.
A: Re tla hlakola lisebelisoa ho beha lisebelisoa hore li be mongobo, ebe re li kenya ka lebokoseng la lebokose ho senya ts'ireletso nakong ea lipalangoang.
A: Re sebelisa lisebelisoa tse tala tsa boleng bo holimo bakeng sa ho sebetsa le ho hlahisa, ha re sebelise thepa e tsosolositsoeng, lisebelisoa tsa nozzle le lisebelisoa tsa bobeli tsa ho sebetsa, 'me boleng bo tiisitsoe.
A: E, re etsa khoebo likhutlong tsohle tsa lefats'e, ka kopo ikopanye le rona bakeng sa litefiso tse felletseng tsa thomello.
Ke Hobane'ng ha U Re Khetha?
Ikopanye le rona ka lengolo-tsoibila info@torwell3d.com kapa whatsapp+86 13798511527.
Lithekiso tsa rona li tla bapala maikutlo a rona nakong ea lihora tse 12.
| Botenya | 1.04 g/cm3 |
| Melt Flow Index(g/10min) | 12 (220 ℃/10kg) |
| Mocheso oa ho Sotha Mocheso | 77 ℃, 0.45MPa |
| Matla a tšepe | 45 MPa |
| Elongation at Break | 42% |
| Flexural Matla | 66.5MPa |
| Flexural Modulus | 1190 MPa |
| IZOD Impact Matla | 30kJ/㎡ |
| Ho tšoarella | 8/10 |
| Khatiso | 7/10 |
| Extruder Temperature(℃) | 230 - 260 ℃ E khothalelitsoe 240 ℃ |
| Thempereichara ea bethe(℃) | 90 - 110°C |
| Boholo ba Nozzle | ≥0.4mm |
| Lebelo la Fane | LOW bakeng sa boleng bo holimo / OFF bakeng sa matla a betere |
| Lebelo la ho Hatisa | 30 - 100mm / s |
| Bethe e futhumetseng | Ho hlokahala |
| E khothalelitsoeng ho Haha Libaka | Khalase e nang le sekhomaretsi, pampiri ea Masking, Blue Tape, BuilTak, PEI |
