PLA Filament Gray mmala 1kg spool
| Brand | Torwell |
| Lintho tse bonahalang | PLA e Tloaelehileng (NatureWorks 4032D / Total-Corbion LX575) |
| Diameter | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 1 Kg / spool;250g / spool;500g / spool;3kg / spool;5kg / spool;10kg / spool |
| Boima bo felletseng | 1.2Kg/spool |
| Mamello | ± 0.02mm |
| Tikoloho ea Polokelo | E omme ebile e kenya moea |
| Ho omisa Setting | 55˚C bakeng sa 6h |
| Lisebelisoa tsa tšehetso | Etsa kopo ka Torwell HIPS, Torwell PVA |
| Tumello ea Setifikeiti | CE, MSDS, Reach, FDA, TUV le SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le likhatiso tse ling tsa FDM 3D |
| Sephutheloana | 1kg / spool;8spools/ctn kapa 10spools/ctn mokotla oa polasetiki o tiisitsoeng o nang le li-desiccants |
Mmala bakeng sa ho Khetha:
Mmala oa Fumaneha
Letoto le tlwaelehileng:Bosoeu, Botsho, Bokhubelu, Boputsoa, Botala, Botala, Tlhaho, Silevera, Boputsoa, Letlalo, Khauta, Bopinki, Bopherese, Orange, Khauta-bosehla, Lehong, Botala ba Keresemese, Galaxy blue, Sky blue, Transparent
Letoto la Florescent:Luorescent Red, Bosehla ba Fluorescent, Botala ba Fluorescent, Boputsoa ba Fluorescent
Letoto le khanyang:Botala bo khanyang, boputsoa bo khanyang
Letoto la ho fetola mebala:Botala bo boputsoa ho isa ho botala bo bosehla, Boputsoa ho isa bosoeu, Pherese ho isa ho Pinki, Boputsoa ho isa Bosoeu
Mmala o ikhethileng oa fumaneha.Ke uena feela ea re tsebisang khoutu ea RAL kapa ea Pantone.
Printa Model Show
Lintlha tsa Sephutheloana
1kg roll PLA Filament e nang le desiccant ka har'a sephutheloana sa vaccum.
Spool e 'ngoe le e' ngoe ka lebokoseng le le leng (Lebokose la Torwell, Lebokose le Neutral, kapa Lebokose le ikhethileng le fumaneha).
Mabokose a 8 ka lebokose (boholo ba lebokose 44x44x19cm).
Torwell o na le lilemo tse fetang 10 tsa boiphihlelo ba 3D filament R&D, mme o hlahisa mefuta eohle ea likhoele, ho kenyeletsoa PLA, PLA+, PETG, ABS, TPU, Wood PLA, Silk PLA, Marble PLA, ASA, Carbon Fiber, Nylon, PVA, Metal, Cleaning filament. joalo-joalo. 3D filament ka tekanyo e kholo e nang le boleng ba premium, e kenyang letsoho ho sehlahisoeng se theko e tlaase le se ka tšeptjoang bakeng sa likhatiso tsohle tse tloaelehileng tsa 1.75mm FDM 3D.
Malebela a ho Printa ea PLA filament
Ho o thusa ka 3D printing PLA filament, re fana ka malebela a rona a 5 a ho sebelisa malebela a hore o ka hatisa ka PLA filament:
1. Mocheso
Ha u hatisa ka PLA filament, u eletsoa hore u qale ka mocheso o qalang oa 195 ° C, o tla etsa bonnete ba hore u ipha monyetla o motle oa katleho.Joale mocheso o ka fokotsoa kapa oa eketseha ka likhato tse 5 ho fumana boleng bo nepahetseng ba khatiso le matla e le hore li tlatsane.Ho ntlafatsa ho khomarela poleiti ea mohaho, ho molemo ho futhumatsa bethe ea khatiso ho likhato tse 60.
2. Mocheso o phahame haholo
Haeba mocheso o phahame haholo, likhoele li tla khahlisa.Extruder e tla lutla thepa ea PLA ha e tsamaea lipakeng tsa libaka tse fapaneng nakong ea khatiso.Haeba sena se etsahala, o tla tlameha ho fokotsa mocheso.Etsa sena ka li-increments tsa 5 degrees ka mohato, ho fihlela extruder e khaotsa ho lutla lintho tse ngata.
3. Mocheso o tlase haholo
Haeba mocheso oa khatiso o bata haholo, u tla fumana hore filament e tla hlōleha ho khomarela lera le fetileng.E tla etsa bokaholimo bo shebahalang bo le thata.Ho sa le joalo, karolo e tla fokola 'me joale e ka huloa habonolo.Haeba sena se ka etsahala, mocheso oa hlooho ea khatiso o lokela ho eketseha ka likhato tse 5 ho fihlela khatiso e shebahala e le ntle 'me likarolo tsa mola bakeng sa lera ka leng li nepahetse.Ka lebaka leo karolo e tla ba matla le ho feta ha mosebetsi o phethiloe.
4. Boloka khoele ea PLA e omme
Lisebelisoa tsa PLA li hloka ho bolokoa sebakeng se pholileng le se lefifi, haholo-holo ka mokotleng o tiisitsoeng, o ka u thusang ho boloka boleng ba polasetiki ea PLA.E tla etsa bonnete ba hore sephetho sa mokhoa oa khatiso se ba joalo ka ha ho lebelletsoe.
| Botenya | 1.24 g/cm3 |
| Melt Flow Index(g/10min) | 3.5（190℃/2.16kg） |
| Mocheso oa ho Sotha Mocheso | 53℃, 0.45MPa |
| Matla a tšepe | 72 MPa |
| Elongation at Break | 11.8% |
| Flexural Matla | 90 MPa |
| Flexural Modulus | 1915 MPa |
| IZOD Impact Matla | 5.4kJ/㎡ |
| Ho tšoarella | 4/10 |
| Khatiso | 9/10 |
| Extruder Temperature(℃) | 190 - 220 ℃ |
| Thempereichara ea bethe(℃) | 25 - 60°C |
| Boholo ba Nozzle | ≥0.4mm |
| Lebelo la Fane | Ka 100% |
| Lebelo la ho Hatisa | 40 - 100mm / s |
| Bethe e futhumetseng | Taba ea boikhethelo |
| E khothalelitsoeng ho Haha Libaka | Khalase e nang le sekhomaretsi, pampiri ea Masking, Blue Tape, BuilTak, PEI |
