PETG Filament e nang le mebala e mengata bakeng sa khatiso ea 3D, 1.75mm, 1kg
Likarolo tsa Sehlahisoa
✔️100% e se nang mafito-Maqhubu a phethahetseng a khoele a tsamaellanang le likhatiso tse ngata tsa DM/FFF 3D.Ha ho hlokahale hore u jare ho hloleha ha khatiso aflihora tse 10 tsa khatiso kapa ho feta ka lebaka la taba e ferekaneng.
✔️Matla a Molemo 'Meleng-Matla a matle a 'mele ho feta risepe ea PLA Non-brittle le matla a matle a bonding a etsa hore likarolo tse sebetsang li khonehe.
✔️Mocheso o Phahameng & Ts'ebetso ea Kantle-Mocheso o sebetsang oa 20 ° C o eketsehile ho feta PLA Filament, lik'hemik'hale tse ntle le khanya ea letsatsi e hanyetsanang le eona e loketseng bakeng sa kopo ea ka ntle.
✔️Ha ho warping & Precision Diameter-Mokhoa o motle oa ho khomarela lera la pele ho fokotsa warpage.ho honyela.ho hloleha ho kobeha le ho hatisa.Taolo e ntle ea bophara.
| Brand | Torwell |
| Lintho tse bonahalang | SkyGreen K2012/PN200 |
| Diameter | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 1 Kg / spool;250g / spool;500g / spool;3kg / spool;5kg / spool;10kg / spool |
| Boima bo felletseng | 1.2Kg/spool |
| Mamello | ± 0.02mm |
| Bolelele | 1.75mm(1kg) = 325m |
| Tikoloho ea Polokelo | E omme ebile e kenya moea |
| Ho omisa Setting | 65˚C bakeng sa 6h |
| Lisebelisoa tsa tšehetso | Etsa kopo ka Torwell HIPS, Torwell PVA |
| Tumello ea Setifikeiti | CE, MSDS, Reach, FDA, TUV, SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le likhatiso tse ling tsa FDM 3D |
| Sephutheloana | 1kg / spool;8spools/ctn kapa 10spools/ctn mokotla oa polasetiki o tiisitsoeng o nang le li-desiccants |
Mebala e Meng
Mmala oa Fumaneha
| Mobala oa motheo | Bosweu, Botsho, Bofubedu, Boputswa, Bosehla, Botala, Boputswa, Silevera, Namunu, Tse Bonahalang |
| Mmala o mong | Mmala o ikhethileng oa fumaneha |
Filament e 'ngoe le e' ngoe e mebala eo re e etsang e entsoe ho latela mokhoa o tloaelehileng oa mebala e kang Pantone Color Matching System.Sena se bohlokoa molemong oa ho etsa bonnete ba hore moriti o tsitsitseng oa mebala le sehlopha se seng le se seng hammoho le ho re lumella ho hlahisa mebala e ikhethang joalo ka Multicolor le mebala e Tloaelehileng.
Setšoantšo se bonts'itsoeng ke setšoantšo sa ntho eo, 'mala o ka fapana hanyane ka lebaka la tlhophiso ea mebala ea leihlo le leng le le leng.Ka kopo, sheba habeli boholo le 'mala pele u reka
Pontšo ea Mohlala
Sephutheloana
Tkapa hantlePETG Filament e tla ka mokotleng o koetsoeng oa vacuum o nang le mokotla oa desiccant, boloka habonolo khoele ea hau ea printa ea 3D sebakeng se nepahetseng sa polokelo 'me e se na lerōle kapa litšila.
1kg roll PETG filament e nang le desiccant ka har'a sephutheloana sa vaccum.
Spool e 'ngoe le e' ngoe ka lebokoseng le le leng (Lebokose la Torwell, Lebokose le Neutral, kapa Lebokose le ikhethileng le fumaneha).
Mabokose a 8 ka lebokose (boholo ba lebokose 44x44x19cm).
Mokhoa oa ho boloka
1. Haeba u tla tlohela printa ea hau e sa sebetse ka nako e fetang matsatsi a 'maloa, ka kopo tlosa khoele ho sireletsa nozzle ea printa ea hau.
2. E le hore u lelefatse bophelo ba filament ea hau, ka kopo, khutlisetsa filament e sa tiisitsoeng ka mokotleng oa pele oa vacuum 'me ue behe sebakeng se pholileng le se omileng ka mor'a ho hatisoa.
3. Ha u boloka khoele ea hau, ka kopo fepa ntlha e hlephileng ka likoti tse moeling oa filament reel ho qoba ho tsoelipana, e le hore e iphepe hantle ha u e sebelisa nakong e tlang.
Setsi sa Fektheri
LBH
A: thepa e entsoe ka thepa e ikemetseng ka ho feletseng, 'me mochine o otlolla terata ka boeona.ka kakaretso, ho ke ke ha e-ba le mathata a mangata.
A: thepa ea rona e tla behoa pele ho tlhahiso ho thibela ho thehoa ha li-bubble.
A: bophara ba terata ke 1.75mm le 3mm, ho na le mebala e 15, hape e ka etsa mmala oo u o batlang haeba ho na le taelo e kholo.
A: Re tla hlakola lisebelisoa ho beha lisebelisoa hore li be mongobo, ebe re li kenya ka lebokoseng la lebokose ho senya ts'ireletso nakong ea lipalangoang.
A: Re sebelisa lisebelisoa tse tala tsa boleng bo holimo bakeng sa ho sebetsa le ho hlahisa, ha re sebelise thepa e tsosolositsoeng, lisebelisoa tsa nozzle le lisebelisoa tsa bobeli tsa ho sebetsa, 'me boleng bo tiisitsoe.
A: E, re etsa khoebo likhutlong tsohle tsa lefats'e, ka kopo ikopanye le rona bakeng sa litefiso tse felletseng tsa thomello.
| Botenya | 1.27 g/cm3 |
| Melt Flow Index(g/10min) | 20 (250℃/2.16kg) |
| Mocheso oa ho Sotha Mocheso | 65 ℃, 0.45MPa |
| Matla a tšepe | 53 MPa |
| Elongation at Break | 83% |
| Flexural Matla | 59.3MPa |
| Flexural Modulus | 1075 MPa |
| IZOD Impact Matla | 4.7kJ/㎡ |
| Ho tšoarella | 8/10 |
| Khatiso | 9/10 |
Ha u se u ithutile lintho tsa motheo tsa ho hatisa ka PETG, u tla fumana ho le bonolo ho hatisa ka tsona 'me e tsoa hantle ka mefuta e mengata ea mocheso.E ntle le bakeng sa likhatiso tse kholo tse bataletseng ka lebaka la ho honyela ha eona ho tlase haholo.Motsoako oa matla, shrinkage e tlase, pheletso e boreleli le ho hanyetsa mocheso o phahameng ho etsa hore PETG e be sebaka se loketseng sa letsatsi le letsatsi ho PLA le ABS.
Likarolo tse ling li kenyelletsa ho khomarela lera le leholo, khanyetso ea lik'hemik'hale ho kenyelletsa acid le metsi.Tkapa hantlePETG filament e tšoauoa ka boleng bo tsitsitseng, ho nepahala ha dimensional e phahameng 'me e lekoa ka mokhoa o pharaletseng ka mefuta e mengata ea khatiso;e fana ka likhatiso tse matla haholo le tse nepahetseng.
| Extruder Temperature(℃) | 230 - 250 ℃ E khothalelitsoe 240 ℃ |
| Thempereichara ea bethe(℃) | 70 - 80°C |
| Boholo ba Nozzle | ≥0.4mm |
| Lebelo la Fane | LOW bakeng sa boleng bo holimo / OFF bakeng sa matla a betere |
| Lebelo la ho Hatisa | 40 - 100mm / s |
| Bethe e futhumetseng | Ho hlokahala |
| E khothalelitsoeng ho Haha Libaka | Khalase e nang le sekhomaretsi, pampiri ea Masking, Blue Tape, BuilTak, PEI |
- U ka boela ua etsa liteko lipakeng tsa 230°C - 250°C ho fihlela boleng bo loketseng ba khatiso bo fihlellwa.240°C ka kakaretso ke sebaka se setle sa ho qala.
- Haeba likarolo li bonahala li fokola, eketsa mocheso oa khatiso.PETG e fumana matla a holimo ho hoo e ka bang 250°C
- Layer cooling fan e itšetlehile ka mohlala o hatisoang.Mehlala e meholo ha e hloke ho pholisoa ka kakaretso empa likarolo / sebaka se nang le linako tse khutšoane tsa lera (lintlha tse nyane, tse telele le tse tšesaane, joalo-joalo) li ka hloka ho pholisoa, hoo e ka bang 15% hangata e lekane, bakeng sa li-overhangs tse feteletseng u ka nyolohela ho tse fetang 50. %.
- Beha mocheso oa bethe ea hau ea khatiso hoo e batlang e le75°C +/- 10(ho chesa haholo bakeng sa lihlopha tse 'maloa tsa pele haeba ho khoneha).Sebelisa thupa ea sekhomaretsi bakeng sa ho khomarela bethe hantle.
- PETG ha e hloke ho petetsoa betheng ea hau e futhumetseng, o batla ho siea lekhalo le leholoanyane holim'a axis ea Z ho lumella sebaka se eketsehileng sa polasetiki ho beha fatše.Haeba nozzle ea extruder e le haufi haholo le bethe, kapa lesela le fetileng le tla thella le ho etsa likhoele le ho haha ho pota-pota molomo oa hau.Re khothaletsa hore u qale ho tlosa molomo oa hau hole le bethe ka li-increments tsa 0.02mm, ho fihlela ho se na ho qhekella ha u hatisa.
- Hatisa ka khalase ka thupa ea sekhomaretsi kapa sebaka seo u se ratang haholo sa khatiso.
- Molemo ka ho fetisisa mokhoa pele o hatisa thepa efe kapa efe PETG ke ho omella pele o sebelisa (esita le haeba e ncha), omisa ka 65 ° C bakeng sa bonyane 4 lihora tse.Haeba ho khoneha, omisa lihora tse 6-12.PETG e omisitsoeng e lokela ho nka libeke tse ka bang 1-2 pele e hloka ho omisa.
- Haeba khatiso e le likhoele tse ngata haholo, leka hape ho ntša hanyenyane.PETG e ka ba le kutlo ho feta extrusion (blobbing joalo-joalo) - haeba u na le phihlelo ena, tlisa feela extrusion setting ka selaeseng kamehla-ho-hanyenyane nako le nako ho fihlela e emisa.
- Ha ho raft.(haeba bethe ea khatiso e sa futhumatsoe, nahana ka ho sebelisa brim ho e-na le hoo, bophara ba 5 kapa ho feta.)
- 30-60mm / s lebelo la khatiso
