1.75mm 1kg Khauta PLA 3D Printer li phutholohe
Likhoele tsa khatiso ea Torwell 3D PLA li entsoe ka ho khetheha bakeng sa khatiso ea rona ea letsatsi le letsatsi. Neng kapa neng ha re hatisa mekhabiso ea lapeng, lintho tsa ho bapala le lipapali, malapa, feshene, li-prototype, kapa lisebelisoa tsa motheo, Torwell PLA e lula e le holimo lethathamong e le boleng ba eona bo tsitsitseng le mebala e metle.
| Letšoao | Torwell |
| Thepa | PLA e Tloaelehileng (NatureWorks 4032D / Total-Corbion LX575) |
| Bophara | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Boima bo felletseng | 1.2Kg/spool |
| Mamello | ± 0.02mm |
| Tikoloho ea Polokelo | E omme ebile e na le moea o kenang |
| Sebaka sa ho Omisa | 55˚C bakeng sa lihora tse 6 |
| Lisebelisoa tsa tšehetso | Sebelisa ka Torwell HIPS, Torwell PVA |
| Kamohelo ea Setifikeiti | CE, MSDS, Reach, FDA, TUV le SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le liprinta life kapa life tse ling tsa FDM 3D |
| Sephutheloana | 1kg/spool; 8spools/ctn kapa 10spools/ctn mokotlana oa polasetiki o koetsoeng o nang le lintho tse nosetsang |
Mebala e Mengata
'Mala o Fumanehang:
| 'Mala oa motheo | Bosweu, Botsho, Bofubedu, Boputsoa, Bosehla, Botala, Tlhaho, |
| 'Mala o mong | Silevera, Putsoa, Letlalo, Khauta, Pinki, Pherese, Lamunu, Khauta e mosehla, Lehong, Botala ba Keresemese, Boputsoa ba Galaxy, Boputsoa ba Leholimo, Bo bonaletsang |
| Letoto la khanya ea letsatsi | Bofubelu bo khanyang, Bosehla bo khanyang, Botala bo khanyang, Boputsoa bo khanyang |
| Letoto la khanya | Botala bo Bonang, Boputsoa bo Bonang |
| Letoto la ho fetola mebala | Botala bo boputsoa ho isa ho botala bo bosehla, Boputsoa ho isa ho bosweu, Pherese ho isa ho pinki, Bohlooho ho isa ho bosweu |
| Amohela 'Mala oa PMS oa Moreki | |
Pontšo ea Mehlala
Sephutheloana
Filament ea 1kg ea PLA 3D Printer ea roll 1kg e nang le desiccant ka har'a sephutheloana sa vaccum.
Sekotlolo se seng le se seng ka lebokoseng le le leng (Lebokose la Torwell, Lebokose le sa nke lehlakore, kapa Lebokose le ikhethileng le ka fumaneha).
Mabokose a 8 ka lebokose (boholo ba lebokose ke 44x44x19cm).
Malebela
- Ka kopo kenya khoele ka har'a masoba a mahlakoreng kamora ho e sebelisa ho qoba ho hohlana;
- Ka kopo boloka filament ea printa ea 3D ka mokotleng o koetsoeng kapa ka lebokoseng kamora ho e sebelisa.
Litlhophiso tsa Printa
- Lebelo:10-20 mm/s Lera la pele, karolo e setseng ea 20-80 mm/s.
- Sebaka sa ho Beha Nozzle:190-220C (e chesang ka ho fetisisa lera la pele bakeng sa ho khomarela hantle).
- Nko ea 'Nete:boloka sebaka se behiloeng, fokotsa lebelo haeba le le ka tlase ho.
- Mofuta oa Nozzle:E tloaelehileng kapa e hanelang ho tsofala bakeng sa tšebeliso e telele.
- Bophara ba Nozzle:Ho khethoa 0.6mm kapa ho feta, 0.4mm e loketse ka bonyane 0.25mm bakeng sa litsebi.
- Botenya ba lera:Ho kgothaletswa hore ho be le tekatekano ya boleng, botshepehi le tlhahiso ya 0.15-0.20mm.
- Mocheso oa Bethe:25-60C (ho feta 60C ho ka mpefatsa ho kobeha).
- Tokiso ea Bethe:Sekhomaretsi se nyamelang sa Elmers se pherese kapa setlolo se seng seo u se ratang sa PLA.
Ke hobane'ng ha khoele e sa khomarele betheng ea kaho habonolo?
- Mocheso:Ka kopo hlahloba di-setting tsa mocheso (bethe le nozzle) pele o printa mme o di behe ho loketse;
- Ho batalatsa:Ka kopo hlahloba hore na bethe e bataletse, etsa bonnete ba hore nozzle ha e hole haholo kapa ha e atamele haufi haholo le bethe;
- Lebelo:Ka kopo hlahloba hore na lebelo la ho hatisa la lera la pele le potlakile haholo.
LBH
A: Bophara ba terata ke 1.75mm, 2.85mm le 3mm, ho na le mebala e 34, 'me e ka boela ea etsa hore 'mala o be oa hau.
K: Re sebelisa thepa e tala ea boleng bo holimo bakeng sa ts'ebetso le tlhahiso, ha re sebelise thepa e sebelisitsoeng hape, thepa ea nozzle le thepa ea ts'ebetso ea bobeli, 'me boleng boa tiisetsoa.
K: Feme ea rona e fumaneha Shenzhen City, Chaena. Rea u amohela ho etela fektheri ea rona.
A: Re ka u fa sampole ea mahala bakeng sa teko, empa moreki o lefa litšenyehelo tsa ho romella.
K: Ho ipapisitsoe le lebokose la mantlha la fektheri, moralo oa mantlha sehlahisoa se nang le leiboleng le sa nke lehlakore, sephutheloana sa mantlha bakeng sa lebokose la kantle ho naha. E entsoe ka mokhoa o ikhethileng e lokile.
K: Ⅰ. Bakeng sa thepa ea LCL, re hlophisa k'hamphani e tšepahalang ea thepa ho e isa polokelong ea moemeli oa thepa.
Ⅱ. Bakeng sa thepa ea FLC, setshelo se ea ka ho toba ho thepa ea fektheri. Basebetsi ba rona ba litsebi ba ho kenya thepa, ba tsamaeang le basebetsi ba rona ba forklift, ba hlophisa thepa ka tatellano e ntle esita le haeba matla a letsatsi le letsatsi a ho kenya thepa a le mangata haholo.
Ⅲ. Tsamaiso ea rona ea data ea profeshenale ke tiisetso ea ntlafatso ea nako ea sebele le kopano ho lethathamo lohle la liphutheloana tsa motlakase, invoice.
| Botenya | 1.24 g/cm3 |
| Tekanyo ea Phallo ea Qhibilihang (g/10min) | 3.5()190℃/2.16kg) |
| Mocheso oa ho sotha mocheso | 53℃, 0.45MPa |
| Matla a tšepe | 72 MPa |
| Ho Lelefatsa Nako ea Phomolo | 11.8% |
| Matla a ho Tenyetseha | 90 MPa |
| Modulus ea ho Flexural | 1915 MPa |
| Matla a Tšusumetso ea IZOD | 5.4kJ/㎡ |
| Ho tšoarella | 4/10 |
| Ho ka hatisoa habonolo | 9/10 |
| Mocheso oa Extruder (℃) | 190 – 220℃ Khothaletso ea 215℃ |
| Mocheso oa bethe (℃) | 25 – 60°C |
| Boholo ba Nozzle | ≥0.4mm |
| Lebelo la Fene | Ka 100% |
| Lebelo la ho Hatisa | 40 – 100mm/s |
| Bethe e futhumetseng | Boikhethelo |
| Libaka tse Khothaletsoang tsa Kaho | Khalase e nang le sekhomaretsi, Pampiri ea ho phuthela, Theipi e Putsoa, BuilTak, PEI |
