1.75mm/2.85mm Filament 3D PLA 'Mala o pinki
| Letšoao | Torwell |
| Thepa | PLA e Tloaelehileng (NatureWorks 4032D / Total-Corbion LX575) |
| Bophara | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Boima bo felletseng | 1.2Kg/spool |
| Mamello | ± 0.02mm |
| Tikoloho ea Polokelo | E omme ebile e na le moea o kenang |
| Sebaka sa ho Omisa | 55˚C bakeng sa lihora tse 6 |
| Lisebelisoa tsa tšehetso | Sebelisa ka Torwell HIPS, Torwell PVA |
| Kamohelo ea Setifikeiti | CE, MSDS, Reach, FDA, TUV le SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le liprinta life kapa life tse ling tsa FDM 3D |
| Sephutheloana | 1kg/spool; 8spools/ctn kapa 10spools/ctnmokotlana oa polasetiki o koetsoeng o nang le lintho tse nosetsang |
Mebala e Mengata
'Mala o Fumanehang:
| 'Mala oa motheo | Bosweu, Botsho, Bofubedu, Boputsoa, Bosehla, Botala, Tlhaho, |
| 'Mala o mong | Silevera, Putsoa, Letlalo, Khauta, Pinki, Pherese, Lamunu, Khauta e mosehla, Lehong, Botala ba Keresemese, Boputsoa ba Galaxy, Boputsoa ba Leholimo, Bo bonaletsang |
| Letoto la khanya ea letsatsi | Bofubelu bo khanyang, Bosehla bo khanyang, Botala bo khanyang, Boputsoa bo khanyang |
| Letoto la khanya | Botala bo Bonang, Boputsoa bo Bonang |
| Letoto la ho fetola mebala | Botala bo boputsoa ho isa ho botala bo bosehla, Boputsoa ho isa ho bosweu, Pherese ho isa ho pinki, Bohlooho ho isa ho bosweu |
| Amohela 'Mala oa PMS oa Moreki | |
Pontšo ea Mehlala
Sephutheloana
Moqolo oa 1kgFilament 3D PLAka desiccant ka har'a sephutheloana sa vaccum.
Sekotlolo se seng le se seng ka lebokoseng le le leng (Lebokose la Torwell, Lebokose le sa nke lehlakore, kapa Lebokose le ikhethileng le ka fumaneha).
Mabokose a 8 ka lebokose (boholo ba lebokose ke 44x44x19cm).
Hobaneng o reka ho Torwell?
Melemo ea rona:
1. Ha ho na bubble, boleng bo botle ho tšehetsa sephetho se phethahetseng sa khatiso.
2. Theko e rekisoang ka bongata fekthering, tšehetsa mosebetsi oa OEM
3. Khetho e eketsehileng ea mebala, fihla ho mebala e fihlang ho e 30, 'me' mala o ikhethileng oa fumaneha
4. Litšebeletso tse betere pele ho tšebeletso le ka mor'a tšebeletso
Ho sa tsotelehe hore na odara ea hau e bokae, re fana ka tšebeletso e tšoanang
Hang ha o se o le molekane oa rona, re tla tšehetsa papatso ea hau, ho kenyeletsoa le litšoantšo tsa sehlahisoa.
Sehlahisoa sohle se tla hlahlojoa hape pele se romelloa. Baenjiniere ba tekheniki ba tla ba inthaneteng ho thusa haeba ho hlokahala.
Re hola re le bareki bohle ba rona mmoho.
5. Ho fana ka thepa ka potlako, sampole kapa odara e nyane matsatsing a 1-2, odara e kholo kapa ea OEM matsatsi a 5-7.
6. Na k'hamphani ea hau e na le websaete?
K: E, re na le liwebsaete tse peli: www.3dtorwell.com le www.torwell3d.com
Malebela a ho Printa
1. Pele kapa ka mora ho sebedisa, re kgothaletsa hore o kenye ntlha ya khoele ka hara lesoba le lenyenyane lehlakoreng la spool ho qoba ho kopana. Ka kopo e sehe ka ho sebedisa seha lehlakore pele o kenya khoele ka hara extrude, leha e sa robeha, khoele e kobehileng e tla baka jeme kapa boleng bo bobe.
2. Haeba o sa printe matsatsing a mmalwa a tlang, ka kopo hula khoele ho sireletsa nozzle ya printa.
3. Ho hlwekisa ka ho hlwekisa filament kapa ho fetola nozzle pele o printa ke tsela e sebetsang ya ho fokotsa jeme.
4. Haeba lera la pele le sa kgomarela hantle, o ka leka:
1). Batalatsa substrate ea khatiso hape ho fokotsa sebaka se pakeng tsa nozzle le phanele.
2). Ho sebedisa theipi ya 3M/theipi ya ho kwala/thupa ya sekhomaretsi ho ka thusa hore filament e kgomarele phanele hamolemo.
3). Phahamisa mocheso oa bethe ka ho loketseng.
5. Thepa e fapaneng le printa e fapaneng li tla ba le maemo a fapaneng a loketseng. Ka kopo sheba sephutheloana sa rona. Kapa re romelle imeile bakeng sa tšehetso e eketsehileng ea tekheniki.
| Botenya | 1.24 g/cm3 |
| Tekanyo ea Phallo ea Qhibilihang (g/10min) | 3.5()190℃/2.16kg) |
| Mocheso oa ho sotha mocheso | 53℃, 0.45MPa |
| Matla a tšepe | 72 MPa |
| Ho Lelefatsa Nako ea Phomolo | 11.8% |
| Matla a ho Tenyetseha | 90 MPa |
| Modulus ea ho Flexural | 1915 MPa |
| Matla a Tšusumetso ea IZOD | 5.4kJ/㎡ |
| Ho tšoarella | 4/10 |
| Ho ka hatisoa habonolo | 9/10 |
| Mocheso oa Extruder (℃) | 190 – 220℃E khothaletsoang 215℃ |
| Mocheso oa bethe (℃) | 25 – 60°C |
| Boholo ba Nozzle | ≥0.4mm |
| Lebelo la Fene | Ka 100% |
| Lebelo la ho Hatisa | 40 – 100mm/s |
| Bethe e futhumetseng | Boikhethelo |
| Libaka tse Khothaletsoang tsa Kaho | Khalase e nang le sekhomaretsi, Pampiri ea ho phuthela, Theipi e Putsoa, BuilTak, PEI |
