Silika 1.75mm Silver PLA 3D Printer li phutholohe
Likarolo tsa Sehlahisoa
| Letšoao | Torwell |
| Thepa | metsoako ea polymer ea Pearlescent PLA (NatureWorks 4032D) |
| Bophara | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Boima bo felletseng | 1.2Kg/spool |
| Mamello | ± 0.03mm |
| Bolelele | 1.75mm(1kg) = 325m |
| Tikoloho ea Polokelo | E omme ebile e na le moea o kenang |
| Sebaka sa ho Omisa | 55˚C bakeng sa lihora tse 6 |
| Lisebelisoa tsa tšehetso | Sebelisa ka Torwell HIPS, Torwell PVA |
| Kamohelo ea Setifikeiti | CE, MSDS, Reach, FDA, TUV le SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le liprinta life kapa life tse ling tsa FDM 3D |
| Sephutheloana | 1kg/spool; 8spools/ctn kapa 10spools/ctnmokotlana oa polasetiki o koetsoeng o nang le lintho tse nosetsang |
Mebala e Mengata
'Mala o Fumaneha
| 'Mala oa motheo | Bosweu, Botsho, Bofubedu, Boputsoa, Bosehla, Botala, Silevera, Bohlooho, Khauta, Lamunu, Pinki |
| Amohela 'Mala oa PMS oa Moreki | |
Pontšo ea Mehlala
Sephutheloana
Printa ea silika ea PLA ea 3D ea roll ea 1kg Filament e nang le desiccant ka har'a sephutheloana sa vaccum.
Sekotlolo se seng le se seng ka lebokoseng le le leng (Lebokose la Torwell, Lebokose le sa nke lehlakore, kapa Lebokose le ikhethileng le ka fumaneha).
Mabokose a 8 ka lebokose (boholo ba lebokose ke 44x44x19cm).
Setsi sa Feme
Tlhahisoleseling e Eketsehileng
E entsoe ka Filament ea SILK - thepa ea thermoplastic e sebelisoang haholo khatisong ea 3D, filament ena e na le ponahalo e ntle e boreleli e tla etsa hore mehlala ea hau ea 3D e phele. Hore na u motho ea ratang khatiso ea 3D kapa u sa tsoa qala, filament ena e tla fihlela litlhoko tsa hau tsa khatiso.
E 'ngoe ea likarolo tse ikhethang ka ho fetisisa tsa Filament ea rona ea Silika ea 1.75mm Silver PLA 3D Printer ke bokhoni ba eona ba ho etsa mehlala e meholo e kobehileng habonolo. Sena se etsa hore e be thepa e loketseng bakeng sa lihlahisoa tse thusang tse kang lisebelisoa tsa thepa ea ka tlung, mekhabiso ea kahare le kantle, le tse ling. Ho feta moo, filament ena e lumellana le mefuta e mengata ea liprinta tsa 3D, ho bolelang hore u ka qala ho hatisa ka nako e khutšoanyane.
Filament ea khatiso ea 3D ea Silika ea 1.75mm Silver PLA ha e shebahale hantle feela - e boetse e fana ka boemo bo phahameng ba ho tšoarella le matla. Thepa ea PLA e sebelisitsoeng kahong ea eona e na le mocheso o qhibilihang oa hoo e ka bang 180-230°C, ho bolelang hore e ka mamella mefuta e fapaneng ea mocheso ntle le ho lahleheloa ke boleng ba eona ba sebopeho. Sena se etsa hore e be ntle bakeng sa ho theha mehlala e rarahaneng ea 3D e hlokang matla a phahameng le ho tšoarella.
Molemo o mong oa filament ea khatiso ea Silika ea silevera ea PLA 3D ke hore e bonolo ho e sebelisa. Ho fapana le lifilament tse ling, ena ha e hloke lisebelisoa tse ngata tse khethehileng kapa boiphihlelo ho hlahisa likhatiso tsa boleng bo holimo. Seo u se hlokang feela ke printa ea 3D e lumellanang le filament ea PLA 'me u loketse ho qala.
Qetellong, Filament ea Printa ea Silika ea 1.75mm Silver PLA 3D ke sehlahisoa se secha se khahlisang se nang le melemo le lits'ebetso tse fapaneng tse tla isa khatiso ea hau ea 3D boemong bo latelang. Ho tloha ponahalong ea eona e ntle e khahlang ho isa bonolo ba ts'ebeliso le ho tšoarella, filament ena e loketse barati ba nang le boiphihlelo ba khatiso ea 3D le ba qalang ka ho tšoana. Joale hobaneng u ema? E leke kajeno 'me u iponele hore na moferefere ke ofe!
Melemo ea Torwell
a). Moetsi, ka filament ea 3D, le sehlahisoa sa khatiso sa 3D se referense, theko ea tlholisano.
b). Phihlelo ea lilemo tse 10 ea ho sebetsa ka thepa e fapaneng ea OEM
c). QC: Tlhahlobo ea 100%
d). Netefatsa sampole: pele ho qala tlhahiso e kgolo re tla romela disampole tsa pele ho tlhahiso ho moreki bakeng sa netefatso.
e). Odara e Nyane e Amohetswe
f). QC e tiileng le boleng bo holimo.
g). Ts'ebetso ea tlhahiso e nang le boiphihlelo bo phahameng
Fana ka sampole ea mahala bakeng sa liteko. Re romelle imeile feelainfo@torwell3d.comKapa Skype alyssia.zheng.
Re tla u fa maikutlo nakong ea lihora tse 24.
| Botenya | 1.21 g/cm3 |
| Tekanyo ea Phallo ea Qhibilihang (g/10min) | 4.7（190℃/2.16kg） |
| Mocheso oa ho sotha mocheso | 52℃, 0.45MPa |
| Matla a tšepe | 72 MPa |
| Ho Lelefatsa Nako ea Phomolo | 14.5% |
| Matla a ho Tenyetseha | 65 MPa |
| Modulus ea ho Flexural | 1520 MPa |
| Matla a Tšusumetso ea IZOD | 5.8kJ/㎡ |
| Ho tšoarella | 4/10 |
| Ho ka hatisoa habonolo | 9/10 |
| Mocheso oa Extruder (℃) | 190 – 230℃ E khothaletsoa 215℃ |
| Mocheso oa bethe (℃) | 45 – 65°C |
| Boholo ba Nozzle | ≥0.4mm |
| Lebelo la Fene | Ka 100% |
| Lebelo la ho Hatisa | 40 – 100mm/s |
| Bethe e futhumetseng | Boikhethelo |
| Libaka tse Khothaletsoang tsa Kaho | Khalase e nang le sekhomaretsi, Pampiri ea ho phuthela, Theipi e Putsoa, BuilTak, PEI |
