PETG e bonaletsang ea 3D e hlakileng
Likarolo tsa Sehlahisoa
| Branta | Tkapawell |
| Thepa | SkyGreen K2012/PN200 |
| Bophara | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Boima bo felletseng | 1.2Kg/spool |
| Mamello | ± 0.02mm |
| Lmoea | 1.75mm(1kg) = 325m |
| Tikoloho ea Polokelo | E omme ebile e na le moea o kenang |
| DSetulo sa ho lla | 65˚C bakeng sa lihora tse 6 |
| Lisebelisoa tsa tšehetso | Etsa kopo kaTOrwell HIPS, Torwell PVA |
| CTumello ea ho netefatsa | CE, MSDS, Reach, FDA, TUV, SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le liprinta life kapa life tse ling tsa FDM 3D |
| Sephutheloana | 1kg/spool; 8spools/ctn kapa 10spools/ctn mokotlana oa polasetiki o koetsoeng o nang le lintho tse nosetsang |
Mebala e Mengata
'Mala o Fumanehang:
| 'Mala oa motheo | Bosweu, Botsho, Bofubedu, Boputsoa, Bosehla, Botala, Bohlooho, Silevera, Lamunu, Bo bonaletsang |
| 'Mala o mong | 'Mala o ikhethileng oa fumaneha |
Pontšo ea Mehlala
Sephutheloana
Filamente ea PETG ea 1kg e nang le desiccant ka har'a sephutheloana sa vaccum.
Sekotlolo se seng le se seng ka lebokoseng le le leng (Lebokose la Torwell, Lebokose le sa nke lehlakore, kapa Lebokose le ikhethileng le ka fumaneha).
Mabokose a 8 ka lebokose (boholo ba lebokose ke 44x44x19cm).
Setsi sa Feme
LBH
1. Limmaraka tse ka sehloohong tsa thekiso li hokae?
Amerika Leboea, Amerika Boroa, Europe, Afrika, Asia jj.
2. Nako ea ho etella pele e nka nako e kae?
Hangata matsatsi a 3-5 bakeng sa sampole kapa odara e nyane. Matsatsi a 7-15 kamora hore depositi e amoheloe bakeng sa odara e ngata. E tla netefatsa nako e qaqileng ea ho etella pele ha o etsa odara.
3. Tekanyetso ea sephutheloana ke efe?
Pakete ea litsebi ea kantle ho naha:
1) Lebokose la mmala la Torwell.
2) Ho paka ho sa nke lehlakore ntle le tlhahisoleseling efe kapa efe ea k'hamphani.
3) Lebokose la hao la lets'oao ho latela kopo ea hau.
4. Ts'ebetso ea ho romella thepa ke efe?
Bakeng sa thepa ea LCL, re hlophisa k'hamphani e tšepahalang ea thepa ho e isa polokelong ea moemeli oa thepa.
Ⅱ. Bakeng sa thepa ea FLC, setshelo se ea ka ho toba ho thepa ea fektheri. Basebetsi ba rona ba litsebi ba ho kenya thepa, ba tsamaeang le basebetsi ba rona ba forklift, ba hlophisa thepa ka tatellano e ntle esita le haeba matla a letsatsi le letsatsi a ho kenya thepa a le mangata haholo.
Ⅲ. Tsamaiso ea rona ea data ea profeshenale ke tiisetso ea ntlafatso ea nako ea sebele le kopano ho lethathamo lohle la liphutheloana tsa motlakase, invoice.
5. Nka fumana disampole tse ding jwang?
Re ka fana ka disampole tsa mahala bakeng sa teko, moreki o hloka feela ho lefa litšenyehelo tsa ho romella.
| Botenya | 1.27 g/cm3 |
| Tekanyo ea Phallo ea Qhibilihang (g/10min) | 20 （250℃/2.16kg） |
| Mocheso oa ho sotha mocheso | 65℃, 0.45MPa |
| Matla a tšepe | 53 MPa |
| Ho Lelefatsa Nako ea Phomolo | 83% |
| Matla a ho Tenyetseha | 59.3MPa |
| Modulus ea ho Flexural | 1075 MPa |
| Matla a Tšusumetso ea IZOD | 4.7kJ/㎡ |
| Ho tšoarella | 8/10 |
| Ho ka hatisoa habonolo | 9/10 |
| Mocheso oa Extruder (℃) | 230 – 250℃Khothaletso ea 240℃ |
| Mocheso oa bethe (℃) | 70 – 80°C |
| Boholo ba Nozzle | ≥0.4mm |
| Lebelo la Fene | TLAASE bakeng sa boleng bo betere ba bokaholimo / TIMILO bakeng sa matla a betere |
| Lebelo la ho Hatisa | 40 – 100mm/s |
| Bethe e futhumetseng | E hlokahala |
| Libaka tse Khothaletsoang tsa Kaho | Khalase e nang le sekhomaretsi, Pampiri ea ho phuthela, Theipi e Putsoa, BuilTak, PEI |
