PETG Carbon Fiber 3D Printer Filament, 1.75mm 800g/spool
Likarolo tsa Sehlahisoa
| Branta | Tkapa hantle |
| Lintho tse bonahalang | 20% High-Modulus Carbon Fibers e kopantsoeng le80%PETG |
| Diameter | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 800g / spool;250g / spool;500g / spool;1kg / spool; |
| Boima bo felletseng | 1.0Kg/spool |
| Mamello | ± 0.03 limilimithara |
| Length | 1.75mm(800g) =260m |
| Tikoloho ea Polokelo | E omme ebile e kenya moea |
| Ho omisa Setting | 60˚C bakeng sa 6h |
| Lisebelisoa tsa tšehetso | Etsa kopo leTorwell HIPS, Torwell PVA |
| Tumello ea Setifikeiti | CE, MSDS, Reach, FDA, TUV le SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap,Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le likhatiso tse ling tsa FDM 3D |
| Sephutheloana | 1kg / spool;8spools/ctn kapa 10spools/ctn mokotla oa polasetiki o tiisitsoeng o nang le li-desiccants |
Mebala e Meng
Pontšo ea ho taka
Sephutheloana
| Botenya | 1.3 g/cm3 |
| Melt Flow Index(g/10min) | 5.5（190℃/2.16kg） |
| Mocheso oa ho Sotha Mocheso | 85℃, 0.45MPa |
| Matla a tšepe | 52.5 MPa |
| Elongation at Break | 5% |
| Flexural Matla | 45MPa |
| Flexural Modulus | 1250MPa |
| IZOD Impact Matla | 8kJ/㎡ |
| Ho tšoarella | 6/10 |
| Khatiso | 9/10 |
Setsi sa Fektheri
Torwell, moetsi ea hloahloa ea nang le boiphihlelo bo fetang lilemo tse 10 mabapi le likhoele tsa khatiso tsa 3D.
Ke hobane'ng ha PETG Carbon Filament?
Carbon Fiber PETG 3D filament ea khatiso e na le matla a phahameng haholo ho boima ba 'mele, ho satalla ho hoholo le ho tiea, ho hanyetsa ho hoboha le ho taboha, khanyetso e ntle ea lik'hemik'hale ho hlapolla litharollo tse nang le metsi a liminerale acid, metheo, letsoai le sesepa, hammoho le aliphatic. li-hydrocarbons, joala, le mefuta e mengata ea oli.
Ke eng?
Li-fibers 5-10 micrometers bophara tse entsoeng ka carbon.Likhoele li tsamaisana ho latela axis ea thepa.Sena, hammoho le sebopeho sa bona sa 'mele, ke sona se fang thepa ena litšobotsi tsa eona tse babatsehang.
E Etsa'ng?
Li-Carbon Fibers li bonts'a lisebelisoa tse ngata tse lakatsehang:
• boima bo phahameng
• matla a phahameng a tsitsipano
• mamello e phahameng ea mocheso
• khanyetso e phahameng ea lik'hemik'hale
• boima bo tlaase
katoloso e tlase ea mocheso
E Sebetsa Joang?
Ho tiisa polasetiki ka likhoele tsa khabone ho hlahisa mohala oa khatiso oa 3D o bonts'ang thepa e ntle ka ho fetisisa ea likhoele tsa carbon le polasetiki ea khetho.
E Molemo Bakeng sa Eng?
E loketse lits'ebetso life kapa life tse hlokang boima bo bobebe le ho tiea.Ka mabaka ana, carbon fiber reinforced filament e tumme haholo sebakeng sa lifofane, boenjiniere ba sechaba, sesoleng le lipapaling tsa likoloi.
Boitsebiso bo Abrasive
Boitsebiso bona bo senya ka ho khetheha har'a li-filaments tsa khatiso tsa 3D.Basebelisi ba ka fumana li-nozzles tse tloaelehileng tsa koporo li hlafunoa ka potlako haholo ha li bapisoa le ho taboha ho tloaelehileng.Ha e felile, bophara ba nozzle bo tla hola ka mokhoa o sa tsitsang mme printa e tla ba le mathata a extrusion.
Ka lebaka lena, ho khothaletsoa ka matla hore thepa ena e hatisoe ka nozzle ea tšepe e thata ho fapana le tšepe e bonolo.Hangata li-nozzles tsa tšepe tse thata li ka ba theko e tlase 'me tsa kengoa habonolo ho latela litaelo tsa moetsi oa hau oa khatiso.
| Extruder Temperature(℃) | 230 - 260℃E khothalelitsoe 245℃ |
| Mocheso oa bethe (℃) | 70 - 90°C |
| Nozzle Boholo | ≥0.5 limilimitharaHo molemo ho sebelisa Nozzles ea tšepe e thata. |
| Lebelo la Fane | Ka 100% |
| Lebelo la ho Hatisa | 40 -80mm/s |
| Bethe e futhumetseng | Taba ea boikhethelo |
| E khothalelitsoeng ho Haha Libaka | Khalase e nang le sekhomaretsi, pampiri ea Masking, Blue Tape, BuilTak, PEI |
