'Mala o moputsoa oa 1.75mm PLA
Likarolo tsa Sehlahisoa
| Branta | Tkapawell |
| Thepa | PLA e Tloaelehileng (NatureWorks 4032D / Total-Corbion LX575) |
| Bophara | 1.75mm/2.85mm/3.0mm |
| Boima bo kahare | 1 Kg/spool; 250g/spool; 500g/spool; 3kg/spool; 5kg/spool; 10kg/spool |
| Boima bo felletseng | 1.2Kg/spool |
| Mamello | ± 0.02mm |
| Tikoloho ea Polokelo | E omme ebile e na le moea o kenang |
| DSetulo sa ho lla | 55˚C bakeng sa lihora tse 6 |
| Lisebelisoa tsa tšehetso | Etsa kopo kaTOrwell HIPS, Torwell PVA |
| Kamohelo ea Setifikeiti | CE, MSDS, Reach, FDA, TUV le SGS |
| E lumellana le | Makerbot, UP, Felix, Reprap, Ultimaker, End3, Creality3D, Raise3D, Prusa i3, Zortrax, XYZ Printing, Omni3D, Snapmaker, BIQU3D, BCN3D, MK3, AnkerMaker le liprinta life kapa life tse ling tsa FDM 3D |
| Sephutheloana | 1kg/spool; 8spools/ctn kapa 10spools/ctnmokotlana oa polasetiki o koetsoeng o nang le lintho tse nosetsang |
Mebala e Mengata
'Mala o Fumanehang:
| 'Mala oa motheo | Bosweu, Botsho, Bofubedu, Boputsoa, Bosehla, Botala, Tlhaho, |
| 'Mala o mong | Silevera, Putsoa, Letlalo, Khauta, Pinki, Pherese, Lamunu, Khauta e mosehla, Lehong, Botala ba Keresemese, Boputsoa ba Galaxy, Boputsoa ba Leholimo, Bo bonaletsang |
| Letoto la khanya ea letsatsi | Bofubelu bo khanyang, Bosehla bo khanyang, Botala bo khanyang, Boputsoa bo khanyang |
| Letoto la khanya | Botala bo Bonang, Boputsoa bo Bonang |
| Letoto la ho fetola mebala | Botala bo boputsoa ho isa ho botala bo bosehla, Boputsoa ho isa ho bosweu, Pherese ho isa ho pinki, Bohlooho ho isa ho bosweu |
| Amohela 'Mala oa PMS oa Moreki | |
Pontšo ea Mehlala
Sephutheloana
Moqolo o 1kg oa 1.75mm PLA filament e nang le desiccant ka har'a sephutheloana sa vaccum
Sekotlolo se seng le se seng ka lebokoseng le le leng (Lebokose la Torwell, Lebokose le sa nke lehlakore, kapa lebokose le ikhethileng le ka fumaneha)
Mabokose a 8 ka lebokose (boholo ba lebokose 44x44x19cm)
Melemo ea rona
a).Moetsi, ka dihlahiswa tsa filament le referense, theko e hlwahlwa.
b). Phihlelo ea lilemo tse 10 ea ho sebetsa ka thepa e fapaneng ea OEM.
c). QC: Tlhahlobo ea 100%.
d).Netefatsa sampole: pele ho qala tlhahiso e kgolo re tla romela disampole tsa pele ho tlhahiso ho moreki bakeng sa netefatso. Re tla fetola hlobo ho fihlela moreki a kgotsofetse.
e). Odara e Nyane e Amohetswe.
f). QC e tiileng le boleng bo holimo.
g) Mokgwa wa tlhahiso o nang le boiphihlelo bo phahameng.
h). Mefuta e mengata ea lihlahisoa tsa OEM.
| Botenya | 1.24 g/cm3 |
| Tekanyo ea Phallo ea Qhibilihang (g/10min) | 3.5()190℃/2.16kg) |
| Mocheso oa ho sotha mocheso | 53℃, 0.45MPa |
| Matla a tšepe | 72 MPa |
| Ho Lelefatsa Nako ea Phomolo | 11.8% |
| Matla a ho Tenyetseha | 90 MPa |
| Modulus ea ho Flexural | 1915 MPa |
| Matla a Tšusumetso ea IZOD | 5.4kJ/㎡ |
| Ho tšoarella | 4/10 |
| Ho ka hatisoa habonolo | 9/10 |
| Mocheso oa Extruder (℃) | 190 – 220℃E khothaletsoang 215℃ |
| Mocheso oa bethe (℃) | 25 – 60°C |
| Boholo ba Nozzle | ≥0.4mm |
| Lebelo la Fene | Ka 100% |
| Lebelo la ho Hatisa | 40 – 100mm/s |
| Bethe e futhumetseng | Boikhethelo |
| Libaka tse Khothaletsoang tsa Kaho | Khalase e nang le sekhomaretsi, Pampiri ea ho phuthela, Theipi e Putsoa, BuilTak, PEI |
